Black silicon carbide/sic grit is produced in a high temperature electric resistance-type furnace from a mixture of quartz sand and petroleum coke. The hardness of black silicon carbide is greater than fused alumina but less than synthetic diamond. Its mechancial intensity is greater than fused alumina, but is brittle and very sharp. The mineral has some electrical and heat conductivity. Black silicon carbide HS Code 28492000, CAS No. 409-21-2, is typically used for machining or finishing cast iron ,non-ferrous metals, stone, leather, rubber, and other materials where sharp cutting characteristics are important. The mineral is also used widely as a refractory material or metallurgical additive. More detailed specifications can be supplied on your request.
We are professional black silicon carbide manufacturer for customers in different industries and countries according to FEPA, JIS, GB, ISO, ANSI & P standard. 0-1mm, 1-3, 3-5mm etc. for refractoriness, FEPA F sizes for bonded abrasives aluminum oxide tools, FEPA P sizes for coated abrasives silicon carbide products.
Black Silicon carbide F14 Grit Basic Indicators:
| Molecular Formula | SiC |
| Appearance | Black Powder |
| CAS No. | 409-21-2 |
| HS Code | 28492000 |
Black Silicon Carbide Chemical Composition (%)
| Grit | Sic | F.C. | Fe2O3 |
| F12-F90 | ≥98.50 | <0.20 | ≤0.60 |
| F100-F150 | ≥98.00 | <0.30 | ≤0.80 |
| F180-F220 | ≥97.00 | <0.30 | ≤1.20 |
| F230-F400 | ≥96.00 | <0.40 | ≤1.20 |
| F500-F800 | ≥95.00 | <0.40 | ≤1.20 |
| F1000-F1200 | ≥93.00 | <0.50 | ≤1.20 |
| P12-P90 | ≥98.50 | <0.20 | ≤0.60 |
| P100-P150 | ≥98.00 | <0.30 | ≤0.80 |
| P180-P220 | ≥97.00 | <0.30 | ≤1.20 |
| P230-P500 | ≥96.00 | <0.40 | ≤1.20 |
| P600-P1500 | ≥95.00 | <0.40 | ≤1.20 |
| P2000-P2500 | ≥93.00 | <0.50 | ≤1.20 |
Black Silicon Carbide Physical Index:
| color | Black |
| Hardness(mohs) | 9.2 |
| Micro hardness(kg/mm2) | 2940-3320 |
| Melting point(℃) | 2600 |
| Maximum service temperature(℃) | 1900 |
| True density(g/cm3) | 3.20-3.25 |
| Bulk density(g/cm3) | ≥1.38 |
| High thermal conductivity(W/m-K) | 100 |
| Linear expansion coefficient (at 900℃ α·10-6K-1) | 4.4 |
| Grits | Bulk Density g/cm3 | High Density g/cm3 | Grits | Bulk Density g/cm3 | High Density g/cm3 |
| F16 ~ F24 | 1.42~1.50 | ≥1.50 | F100 | 1.36~1.45 | ≥1.45 |
| F30 ~ F40 | 1.42~1.50 | ≥1.50 | F120 | 1.34~1.43 | ≥1.43 |
| F46 ~ F54 | 1.43~1.51 | ≥1.51 | F150 | 1.32~1.41 | ≥1.41 |
| F60 ~ F70 | 1.40~1.48 | ≥1.48 | F180 | 1.31~1.40 | ≥1.40 |
| F80 | 1.38~1.46 | ≥1.46 | F220 | 1.31~1.40 | ≥1.40 |
| F90 | 1.38~1.45 | ≥1.45 |
Black Silicon Carbide F016 Grit Particle Size Distribution(PSD)
| F014 | +2360um | 0 | +1700um | ≤20% | +1400um | ≥45% | +1400+1180um | ≥70% | -1000um | ≤3% |
All data based upon RunLong Enterprise’s standard test methods. We could supply grit size according to FEPA, JIS, ANSI, GB & P Standard.
Recommendations By Seller:
Product Specification / Models
For Refractory
0-0.1mm 0-0.2mm 0-0.5mm 0-1mm 0.5-1mm 1-3mm 3-5mm 5-8mm 100mesh 200mesh 325mesh
Other specs are available upon request.
For Bonded & Coated Abrasives
Bonded abrasives: F24 F30 F36 F40 F46 F54 F60 F80 F100 F120 F150 F180 F220 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200
Coated abrasives: P24 P30 P36 P40 P50 P60 P80 P100 P120 P150 P180 P220 P240 P280 P320 P360 P400 P500 P600 P800 P1000 P1200 P1500 P2000 P2500 P3000
Other specs are available upon request.
For Sandblasting & Grinding
F24 F30 F36 F40 F46 F54 F60 F80 F100 F120 F150 F180 F220 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200
Other specs are available upon request.
For further technical data sheet, please do not hesitate to contact us.
Black Silicon Carbide Applications:
1. as an abrasive, it can be used as a grinding tool, such as grinding wheel,oilstone,grinding head, sand tile, etc.
2. As a metallurgical deoxidizer andexotic material.
3. High-purity single crystal, which can be used for manufacturing semiconductors and manufacturingsilicon carbide fiber.
4.It can be used as deoxidizer for steelmaking and modifier for cast iron structure, and as raw material for manufacturing silicon tetrachloride.
5.It can be used as high temperature indirect heating material.
6. Anti-wear lubricants, structural coatings, functional coatings, protective coatings, absorbing materials, stealth materials, etc. in the industrial field
7. Glass polishing, rubber tires and other rubber products, high-performance brake pads, product anti-wear lubrication, high-hardness wear-resistant powder coatings;
8. High-performance structural ceramics (such as rocket nozzles, nuclear industry, etc.), which can be used as ceramic knives, cutting tools, measuring tools, molds; special-purpose structural ceramics, functional ceramics, composite ceramics, engineering ceramics;
9. Protective armor for tanks and armored vehicles;
10. Igniter; electric heating element for electrical industry, far infrared generator.
Packing and storage
Packing: Double coated plastic woven / paper bag, net weight 25kg.
Big bag packing, net weight 1000kg / 1250kg per clients’ request.
Storage: Dry, ventilated, moisture proof.
Delivery
1. The sample will be send by International expresses FEDEX/DHL/UPS/TNT.
2. Full container Load(FCL): By vessel Or International Railway Transportation
3. Less Than Container Load(LCL): By vessel or By air
Payment
1. Payment: T/T, Western Union, LC, Paypal.
2. MOQ: Usually 1Tons
3. Quality Warranty: 1 years
After Sales Service:
1).We are very glad that customer give us some suggestion for price and products.
2).If any question, please let us know it by E-mail or Telephone at the first time. We can deal with them for you in time.
