Brown Corundum

Brown Corundum HS Code 28181010, CAS No. 1344-28-1, is produced by the smelting of Calcined Bauxite in an electric arc furnace at temperatures greater than 2000°C. A slow solidification process follows the fusion, to yield blocky crystals. Strict control over Titania levels during the fusion process ensures optimum toughness of the grains.

Brown Corundum is a tough, sharp abrasive which is highly suitable for grinding metals of high tensile strength. Its thermal properties make it an excellent material for use in the manufacture of refractory products. This material is also used in other applications like blasting and surface hardening.

Chemical Composition

Grade AGrade A’Grade BGrade B’Grade C





Note: Using time: Grade A 5-7tims. Grade B 3-5times. Grade C 1-2times

Main Physical Properties 

Moh’s hardness≥9.0
Melting point2050℃
The maximum temperature1900℃
Specific gravity3.95g/cm3
Bulk density1.68-1.99g/cm3
Real density≥3.90g/cm3

Product Specification / Models

For Refractory
0-0.1mm 0-0.2mm 0-0.5mm 0-1mm 0.5-1mm 1-3mm 3-5mm 5-8mm 100mesh 200mesh 325mesh
Other specs are available upon request.

For Bonded & Coated Abrasives
Bonded abrasives: F24 F30 F36 F40 F46 F54 F60 F80 F100 F120 F150 F180 F220 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200
Coated abrasives: P24 P30 P36 P40 P50 P60 P80 P100 P120 P150 P180 P220 P240 P280 P320 P360 P400 P500 P600 P800 P1000 P1200 P1500 P2000 P2500 P3000
Other specs are available upon request.

For Sandblasting & Grinding
F24 F30 F36 F40 F46 F54 F60 F80 F100 F120 F150 F180 F220 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200
Other specs are available upon request.

For further technical data sheet, please do not hesitate to contact us.

Specific usages of Brown corundum:

1.Used to produce high grade refractory, castable, refractory brick; Main size is 1-3, 3-5, 5-8mm.

2.Used for Grinding wheel—-When grinding high tensile strength materials, choose the good toughness Brown Corundum.
When grinding low hardness with elongation of the material, choose brittle Brown Corundum.

3. Used for Sandblasting – Features: Moderate hardness, high bulk density, without free silicon dioxide, good toughness, fine size and without ash.

4. Used for Floor sand- low grade Brown Corundum can be as an additive for wear-resistant floorings

Recommendations By Seller:

Application of sandblasting: stainless steel, iron workpiece, copper workpiece, glass product, plasthetics, aluminium extruded sections,
Copper section, jean and special plus materials, plush processing and effect of pattern.

Function: Remove surface stains, remove the welding slag and matt effect, remove oxide skin, surface strengthening, the role played by light.
Sandblasting size: 46, 60, 80mesh(Big size could recycle more times. Or according to the customer’s request.

Packing and storage                                                                                       

Packing: Double coated plastic woven / paper bag, net weight 25kg.
Big bag packing, net weight 1000kg / 1250kg per clients’ request.
Storage: Dry, ventilated, moisture proof.

Brown Fused Alumina Tags:
Send your inquiry now!